Commodity ID : 00026516 / Last Modified : 10/26/2020

How to set the date and fourth dimension on the clock radio.

IMPORTANT: This article applies only to specific products and/or operating systems. Bank check Applicative Products and Categories for details.

Follow this process to set the date and time on the clock radio.

Annotation: Non all Clock Radios have the same settings options. To see if your clock radio has this option, check the specifications or supplied operations guide. Manuals are posted on your model support folio.

  1. Plug in the clock radio into a working electrical outlet.

  2. For the ICF-CS10IP and ICF-CS10IPBLK, make sure that the TIME ZONE settings are correct.

    1. Press and hold the - TIME ZONE button for at least 2 seconds until the expanse number 2 flashes in the brandish.
    2. Press the Fourth dimension SET +/- button repeatedly to select i of the following:

      NOTES:

      • Past default, the TIME ZONE setting is set to Eastern Standard Fourth dimension (EST).
      • Although the clock radio is preset from the factory to default to the Eastern Standard Fourth dimension (EST) zone, if the displayed fourth dimension is incorrect or the clock did non change for Daylight Savings Time, make sure to program the time zone for your area.
        Area Number Time Zone
        one Atlantic Standard Fourth dimension
        ii Eastern Standard Fourth dimension
        three Central Standard Time
        iv Mountain Standard Time
        v Pacific Standard Time
        6 Yukon Standard Fourth dimension
        7 Hawaiian Standard Time

    3. Printing the - Fourth dimension ZONE push to set up.

  3. Press and concur the CLOCK button until a beep audio is heard.
  4. Printing the Melody/TIME Fix + or - button to select the correct twelvemonth.
  5. Printing the CLOCK button.
  6. Printing the TUNE/TIME Set + or - push button to select the right month.
  7. Printing the CLOCK button.
  8. Press the Tune/Time SET + or - button to select the correct solar day.
  9. Press the CLOCK push button.
  10. Press the Melody/Time Ready + or - button to select the right hour.
  11. Press the CLOCK button.
  12. Press the TUNE/TIME SET + or - button to select the correct minute.
  13. Press the CLOCK push button.

Follow this process to set the ALARM of the clock radio.

For the ICF-C111:

  1. On the top of the radio, press and concur down the Alarm button.
  2. While pressing the Warning button, press TIME SET H button.
  3. When the desired hour is displayed on the LCD, release the Warning button.
  4. While pressing the Alert button, printing Fourth dimension Gear up Chiliad button.
  5. When the desired minute is displayed on the LCD, release the Alarm button.
  6. To enable the alert, movement the function selector switch to RADIO or Cablegram.

For the SRF-V1BT:

  1. On tiptop of the radio, press and agree down SETTINGS button.
  2. Plow Melody dial until Fourth dimension is displayed.
  3. Press ENTER.
  4. With Fourth dimension setting displayed, press ENTER again.
  5. Plough TUNE dial to select Hour (including AM or FM) and press ENTER.
  6. Plough TUNE punch to select Minutes and printing ENTER.
  7. Press SETTINGS push button to go out carte du jour.

For the ICF-CD873:

  1. Press Warning A for a few seconds until a beep is heard.

    NOTE: ACD and the 60 minutes flashes on the display.

  2. Press TUNE/Time Set up + or - to set the hour.
  3. Press Warning A once more.
  4. Repeat steps ii and three to set the minute.

    NOTE: 2 short beeps audio to confirm the setting. Subsequently a few seconds, the display returns to the current fourth dimension.

For the ICF-CS10IP and ICF-CS10IPBLK:

  1. Printing and hold Alarm SET A or B. WAKE UP appears and the hour flashes in the display.
  2. Printing Fourth dimension SET + or - repeatedly until the desired hour appears. To bicycle the hr apace, press and hold Time SET + or -.
  3. Press ALARM Gear up A or B. The minute flashes.
  4. Echo step 2 to set the minute.
  5. Press Alarm SET A or B. The days of the week flash.
  6. Repeat step ii to set up the days of the calendar week.

    NOTE: Yous tin select the days from the following iii options:

    • Every day: MON TUE Wednesday THU FRI Sabbatum SUN
    • Week twenty-four hour period: Monday TUE Wednesday THU FRI
    • Week end: Sat Dominicus
  7. Press Alarm SET A or B. The warning manner setting is entered.
  8. Press TIME Fix + or - repeatedly until the desired alert mode flashes.

    Note: You can choose one of 5 settings:

    • iPod, FM1, FM2, AM or Cablegram.
    • Fix the alarm style equally follows:

For the ICF-CD820 and ICF-CD821:

  1. While holding downwardly Warning A, press either TIME SET/TRACK + or - until the desired time appears in the display window.

    Note: The ACD indication flashes and ":" lights.

  2. Release Warning A. The alarm time is ready and the indication becomes the current time.
  3. While holding downwards WAKE Up TRACK, set the desired track by pressing Back buttonor Forward button.
  4. Release WAKE UP TRACK. The track is preset and the indication becomes the current time.

    Annotation: When the CD player is preset to start with runway 5, it will ever get-go with track five even if a unlike CD is used, unless the WAKE Upwardly TRACK is changed.

For the ICF-CD853V:

For the CD warning, the track specified every bit the wake-up rail is played kickoff.

Notation: If the CD play manner is set to SHUFFLE or SHUFFLE REP, all the same, all tracks are played in random order.

  1. With the alarm turned on, adjust the book to the level you require.
  2. Press Warning Set up CD for a few seconds.

    Notation: Alert, CD appear on the brandish. After ane beep, ALARM and the 60 minutes will start to wink in the brandish.

  3. Press TUNE/Time SET + or - until the desired 60 minutes appears.

    NOTE: To gear up the hour rapidly, agree down TUNE/Time SET + or -.

  4. Press ALARM Set CD and the minute will flash.
  5. Repeat step 3 to set the minute and press Warning SET CD.

    Notation: The wake-up track number flashes on the brandish.

  6. Printing Tune/TIME SET + or - to select the desired wake-up rail number.

    NOTE: The wake-up track number can be set up to 99.

  7. Printing ALARM SET CD and 2 short beeps will ostend the setting.

Related Articles

  • Customs

    A place where you lot can find solutions and inquire questions